Before The First Use; Assembly Instructions; Operating Instructions - Cuisinart CPP-200 Series Instruction Manual

BEFORE THE FIRST USE

Remove all packaging and any promotional
labels or stickers from your unit. Be sure that
all parts (listed on Page 3, Parts and Features)
have been included before discarding any pack-
aging materials. You may want to keep the box
and packing materials for use at a later date.
Before using your International Chef
Pizzelle/Pancake Plus for the first time, wipe
housing with a damp cloth and wash plates and
accessories well to remove any dust from the
warehouse or shipping.
Note: The International Chef
Pancake Plus has been treated with a special
nonstick coating. Before the first use, we sug-
gest you season the plates with flavorless veg-
etable oil. Apply oil with a paper towel or pastry
brush. You may find it helpful to repeat this pro-
cess before each use.

ASSEMBLY INSTRUCTIONS

Place the International Chef
Pancake Plus on a clean flat surface where you
intend to cook. It can be
positioned in three ways:
Closed Position – Upper
plate/cover rests flat on
lower plate/base. This is
your starting and heat-
ing position. Always use
caution when changing
positions once the unit is
preheated.
Open Position – Upper
plate/cover is open and in
the 105° position. Open
the cover to this position
before using the unit as
a press or in the flat position.
To adjust to this position, press the top of the
locking latch and lift the handle until you feel it
come to a locking position. The unit will stay in
this position until you close the cover or con-
tinue to open it to the flat
position.
Flat Position – Upper
plate/cover is level with
lower plate/base. The
upper and lower plates lie flat to double the
cooking surface.
Crêpe/
™
Crêpe/Pizzelle/
™
Crêpe/Pizzelle/
™
Start with the unit
in the open posi-
tion. Then, lift the
handle vertically at a
90˚ angle. Push the
handle back until
the cover rests flat
on the counter.
The unit will stay in
this position until
you lift the handle
and cover to return
it to the closed position.
To insert plates
1. Adjust the unit to the flat position.
2. Insert one plate at a time. The plate marked
LOWER is designed
for the lower hous-
ing. The plate marked
UPPER is designed
for the upper housing.
3. Locate the two holes
in the hinge at the
back of the housing. Tilt the back end of the
plate and line up the pegs at the back of the
plate with the holes in the hinge. Slide the
plate into the holes and push down the front
end of the plate. It will snap into place.
4. Repeat with second plate.
To remove plates
1. Locate the plate release buttons on the right
side of the unit. Press firmly on button and
the plate will pop
up slightly from the
base.
2. Grasp the plate with
two hands, slide it
out from the holes,
and lift it out of the
base.
3. Press on the other plate release button to
remove the other plate in the same manner.

OPERATING INSTRUCTIONS

1. Plug the power cord into a standard electrical
outlet.
2. Adjust the Temperature Knob to the desired
setting or to one of the preset temperatures if
cooking crêpes, pizzelle, or tortillas. Be sure
to close lid. Red Power-on light will illumi-
nate.
4