Mode Switch Settings For Cc/Cv Models - Miller Electric XMT 456 CC Owner's Manual

5-6. Mode Switch Settings For CC/CV Models

.
The SMAW modes provide the Adaptive Hot Start feature, which automatically increases the output amperage at the start of a weld should the
start require it. This eliminates electrode sticking at arc start.
Mode
Scratch Start TIG (GTAW)
Lift-Arc Trigger
Hold TIG (GTAW)
TIG (GTAW) With
HF Unit,
Pulsing Device,
Or Remote Control
MIG (GMAW)
MIG (GMAW) With
Voltage Sensing
Wire Feeder
pulsing device.)
Control SMAW
Panel Control
SMAW
Pulsed MIG
(GMAW-P)
(Requires an
external
Remote
Output Control
Select: or
Weld:
Select: or
Requires:
Select: or
Requires:
Select: or
Requires: Feeder
Select: or
Weld:
Select: Volt
Requires:
Select: or
Requires:
Select: or
Weld
Amp
Amp
Control
Amp
Control
Volt
Amp
Feeder or Control
Amp
Control
Amp
OM-203 034 Page 25