Part Effect Editing - Yamaha montage6 Owner's Manual

Quick Guide — Editing the Settings
 Element Common Edit display
Indicates that the Element Common Edit display is active.
Switches between Element Common Edit and Element Edit.
The structure of the display is the same as for the Key/
Operator Common Edit display.
 Element Edit display
Indicates that the Element Edit display is active.
The structure of the display is the same as for the Key/
Operator Edit display.
3
Store the Performance as necessary.
NOTE
You can select any desired Performance by pressing the PART
[COMMON] button during editing the Part, and edit the selected
Performance.
34
MONTAGE Owner's Manual

Part Effect Editing

This instrument features a wide variety of Effects, letting you
add Variation and Reverb processing to the selected Part for
your keyboard performance. Simply changing the Effect
type applied to the preset Part lets you instantly come up
with different sounds. The instructions below explain how to
set the Effect type and the related parameters applied to the
Part, and then store the settings as a User Performance.
1
Move the cursor to the Part to be edited on
the Performance Play display, and then press
the [EDIT] button.
2
Press the ELEMENT/OPERATOR [COMMON]
button.
3
Touch the [Effect] tab in the left of the screen

[Routing] tab.
The Effect display for Element Common Edit appears.
1 2
6
1
Output of each Element/Key
2
Category of Insertion Effect A
3
Type of Insertion Effect A
4
Preset of Insertion Effect A
5
Connection method between Insertion Effects A and
B
6
Selection of Side Chain/Modulator
4
Set the output of each Element/Key (
5
Select the parameters (Effect category (
Effect type ( 3 ), and Effect preset (
corresponding to Insertion Effect A.
6
Set the connection method between Insertion
Effects A and B ( ).
5
7
Set the Side Chain/Modulator of Insertion
Effect B ( ).
6
NOTE
The Side Chain/Modulator uses the output from one track to
control an effect in a different track. You can specify the Effect
type for activating the feature so that input signals for Parts other
than the selected Part or the audio input signal can control the
specified Effect.
This trigger is called "Side Chain" or "Modulator" depending on
the Effect Type.
3 4
5
).
1
),
2
4 ))