Quick Guide - Creating Your Own Live Sets; Registering A Performance To A Live Set; Sorting Registered Performances In A Live Set - Yamaha montage6 Owner's Manual

Quick Guide — Creating Your Own Live Sets
The Live Set is ideal for live performance situations since it lets you instantly switch among desired Performances. You can
create your own Live Set by simply grouping together your favorite Performances.
Registering a Performance to a
Live Set
Follow the instructions below to store Performances to Live
Sets.
NOTICE
• Before storing the currently editing Performance to the
Live Set, store the Performance itself (page 32).
• If you select a different Performance or turn off the power
without storing your edited Performance, all the edits
you've made will be erased.
1
Select the Performance you want to use.
2
While any displays other than the Live Set
display appear, hold down the [SHIFT] button
and press the [LIVE SET] button.
The Live Set display appears.
3
Touch one of the slots and press the [ENTER]
button. The currently selected Performance
will be registered in the slot.
NOTE
You can select the slot by using the Number A [1] – [4] and [9] –
[12] buttons, the Number B [1] – [4] buttons, or the Number C [1]
– [4] buttons.
30
MONTAGE Owner's Manual
Live Set display
The performance registered in the slot
Sorting registered Performances
in a Live Set
You can change the order of the Performances registered to
a Live Set on the Live Set Edit display.
1
Press the [EDIT] button while the Live Set
display is shown.
The Live Set Edit display appears.
(The Live Set Edit display will not be shown if a Live Set
of the preset bank/library bank is open.)
2
Select the slot containing the Performance
you want to move and touch [Swap] on the
screen.
The [Swap] lights up and now the slot can be changed.
3
Select the desired destination slot.
The original slot and the destination slot are switched
with each other.
An empty slot