Leveling And Door Adjustment (If Needed) - Haier HRF24E3APS Installation And User Manual

LEVELING AND DOOR
ADJUSTMENT (IF NEEDED)
The refrigerator must be level to maintain optimal performance and
appearance.
LEVELING
The base grille covers the leveling screws located at the bottom of
the refrigerator cabinet below the freezer drawer. Before making
adjustments, remove the base grille and move the refrigerator to its
final location.
1. Remove the three screws attaching the base grille to the
cabinet, and set the screws aside. Grasp the grille and pull it
toward you.
2. Move the refrigerator to its final location.
3. Use the open ended side of the wrench (provided) to adjust the
leveling screw until the refrigerator is level.
NOTE: Having someone push against the top of the refrigerator
takes some weight off the leveling screws. This makes it easier
to turn the screws.
8
ADJUSTING A REFRIGERATOR DOOR
1. Using the open ended side of the wrench (provided with the
unit), turn the screw nut on the lower hinge to adjust the height
of the door.
•
To raise the door: Turn the screw counterclockwise. It may
take several turns of the screw to raise the refrigerator door.
•
To lower the door: Turn the screw clockwise. It may take
several turns of the screw to lower the refrigerator door.
2. Replace the base grille by aligning the holes in the grille with the
holes in the cabinet. Using the screws removed earlier, reinstall
the grille to the cabinet.