Buick Cascada 2016 Manual page 313

312 Vehicle Care
Warning
Never use oil or grease on bolts
or nuts because the nuts might
come loose. The vehicle's wheel
could fall off, causing a crash.
13. Reinstall the wheel nuts.
Tighten each nut by hand until
the wheel is held against
the hub.
14. Lower the vehicle by turning
the jack handle
counterclockwise.
Warning
Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
(Continued)
Warning (Continued)
nuts. See Capacities and
Specifications 0 344 for original
equipment wheel nut torque
specifications.
Caution
Improperly tightened wheel nuts
can lead to brake pulsation and
rotor damage. To avoid expensive
brake repairs, evenly tighten the
wheel nuts in the proper
sequence and to the proper
torque specification. See
Capacities and Specifications
0 344 for the wheel nut torque
specification.
15. Tighten the wheel nuts firmly in
a crisscross sequence, as
shown.
16. Lower the jack all the way and
remove the jack from under the
vehicle.
17. Tighten the wheel nuts firmly
with the wheel wrench.