Working With Detergents - Kärcher K 5.68 M Manual

Detergents can only be applied at
low pressure (Min.).
STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
STEP 2:
Fill the Detergent Tank with the se-
lected Ready To Use detergent.
STEP 3:
Adjusting the detergent metering
Turn to the left:
Meter detergent from Tank 1
Turn to the right:
Meter detergent from Tank 2
10
English

WORKING WITH DETERGENTS

STEP 4:
Turn on the pressure washer (I). Pull
trigger to operate unit: Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 5:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Always Use Kärcher Detergent for
Best Results
Kärcher biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a long-
er life.