Using Guest Mode; Hardware Key Control Mode; Battery And Charger - LG G2 User Manual


If your Lock screen is not set to Pattern, tap OK, then tap Pattern and enter your
normal lock screen pattern as necessary.
Note: If your unlock sequence is set to a PIN or password, you will need to enter it to be able
set the unlock pattern.

Using Guest Mode

After you've set up and enabled Guest mode, lock the screen so that you can enter your Guest
mode pattern. The Guest mode Home screen is displayed with only the apps you've selected for
guest access. To exit Guest mode, enter your normal unlock pattern on the Lock screen.
Note: The Guest mode switch is automatically turned off if your lock sequence is changed
from Pattern. Otherwise, manually disable it if you no longer want to allow guest access.

Hardware Key Control Mode

If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn
off an alarm using the hardware keys.
1. Turn your phone off.
2. Press and hold the Power/Lock Button
same time for more than 6 seconds to enter the Hardware key control mode.
3. Press the Volume Keys
Power/Lock Button

Answer a call: Press either of the Volume Keys.

End a call: Press the Power/Lock Button during a call.

Stop an alarm: When an alarm rings, press and hold the Volume Up Key or
Volume Down Key to stop the alarm.
Note: If you use your phone with a broken display glass, your phone can break even more or
you can be injured. Make sure to visit the LG authorized service center to get your
phone repaired.

Battery and Charger

Approved batteries and accessories can be found through your wireless provider or through LG.
Non-Removable Battery
Your phone has an internal, rechargeable battery that should be replaced only by LG or an
authorized LG repair center. You should never try to open or take apart this phone yourself.
Opening the phone can cause damage that will void your warranty.
Phone Basics
and the Volume Keys
to scroll to the desired option, then press the
to confirm.
at the
13