Larifier; Peration - Yaesu FT DX 3000 Operating Manual

b o
asic

peration

The [ RX CLAR [ TX CLAR [ CLEAR buttons and [ CLAR/VFO-B
the transmit fre uency or oth from their settings on the
indo sho the current larifier offset. he larifier controls on the FT
an offset up to .
CLAR uttons. his feature is ideal for follo ing a drifting station or for setting the small fre uency offsets some-
times utili ed in plit
ere is the techni ue for utili ing the larifier
ress the [ RX CLAR
.
ill appear in the ulti
programmed offset will be applied to the receive fre-
uency.
otation of the [ CLAR/VFO-B knob will allow
.
you to modify your initial offset on the y. ffsets of
up to . may e set using the larifier.
o cancel larifier operation press the [ RX CLAR but-
ton. he RX notation ill disappear from the display.
A :
dvice
urning the larifier off merely cancels the applica-
tion of the programmed offset from the recei e and
or the transmit fre uencies. o clear the
ero press the [ CLEAR but-
offset and reset it to
ton. The programmed offset is displayed in the small
multi channel indo of the fre uency display.
ou may also acti ate the clarifier on the
uency. In this case the offset fre uency is set using
the ain uning ial no
VFO-B knob.
he larifier operation including the offset fre uen-
cy ill e memori ed independently on each
stac of and
The Tuning Offset Indicator provides a graphical representation of the Clarifier offset.
In mode the factory default setting of the uning
enter uning instead of larifier ffset. If you ish to change this so that the
larifier ffset is also displayed on
ress the [ MENU
.
mode.
otate the [ CLAR/VFO-B
.
utton to select
DISPLAY SELECT .
ress the [ SELECT
.
[ CLAR/VFO-B
no
to select CLAR

larifier

CW TUNE
ress the [ SELECT
.
[ MENU button to save the new setting and exit
to normal operation.
Page 36
:
r
eceivinG on
clAr ( c
lAriFier
ithout actually retuning and then to acti ate it ia the larifier [ RX CLAR and [ TX
or .
utton. he RX notation
isplay indo and the
larifier
fre-
instead of the [ CLAR/
.
use the follo ing procedure
utton to enter the enu
no or press the
enu item 010 BAR
utton then rotate the
or press the button)
replacing the default
I selection .
utton then press the
a
mateur
) o
perAtion
no are used to offset the recei e fre uency
fre uency. our small num ers on the
3000 are designed to allow you to preset
DX
Multi-Display Window
TXCLAR
lternately you may apply the
to the transmit fre uency
recei e fre uency typically for split
ups).
ffset Indicator sho s the
[ MENU ] button [ SELECT ] button
[ / ] Button
FT 3000 O
DX
b
anDs
ulti isplay
[ CLEAR ] Button
[ TX CLAR ] Button
[ RX CLAR ] Button
[ CLAR/VFO-B ] Knob
larifier offset
ithout changing the
pile
[ Plus ( + ) Offset ]
[ Zero Offset ]
[ Minus (–) Offset ]
[ CLAR/VFO-B ] Knob
M
peraTing anual