Miller Electric Spoolmatic 15A Owner's Manual page 4

Declaration of Conformity for
European Community (CE) Products
NOTE
Manufacturer:
Miller Electric Mg. Co.
1635 W. Spencer St.
Appleton, WI 54914 USA
Phone: (920) 734-9821
European Contact Signature:
Declares that the product:
conforms to the following Directives and Standards:
Machinery Directives: 98/37/EEC, 91/368/EEC, 92/31/EEC, 133/04, 93/68/EEC
Arc Welding Equipment − Part 10: Electromagnetic Compatibility (EMC) Requirements. IEC 60974-10 August 2002
Arc Welding Equipment − Part 1: Welding Power Sources. IEC 60974-1 Ed. 2.1
Degrees Of Protection Provided By Enclosure (IP Code) IEC 60529 Ed. 2.1
Insulation Coordination For Equipment Within Low-Voltage Systems −
The product technical file is maintained by the responsible Business Unit(s) located at the manufacturing facility.
dec_wire_1/07
This information is provided for units with CE certification (see rating label on unit).
European Contact:
Mr. Danilo Fedolfi,
Managing Director
ITW Welding Products Italy S.r.l.
Via Privata Iseo 6/E
20098 San Giuliano
Milanese, Italy
Phone: 39(02)98290-1
Fax: 39(02)98290203
Spoolmatic
Low Voltage Directive: 73/23/EEC
Electromagnetic Compatibility (EMC) Directive: 89/336/EEC
Arc Welding Equipment − Part 5: Wire Feeders. IEC 60974-5 Ed. 1
Part 1: Principles, Requirements and Tests: IEC 60664-1 Ed. 1.1
15A And 30A
Directives
Standards