Danfoss TP9 Installation Instructions Manual page 22

Weekends (Sat-Sun)
GB
5. Press the PROG button again until
Event 1 appears in the top left of
the display and SASU appears at the
bottom of the display.
6. Use the + and - buttons to set the
time you would like your heating to
fi rst come on in the morning (Event
1).
7. Use the
temperature you want your heating
to reach at this time.
8. To move to the next setting, i.e. when
you would like your heating to go
off (Event 2) press the PROG button
again.
9. Continue
central heating event times and
temperatures for weekend Events 3,
4, 5 & 6 as in Step 6-8.
10. Press the PROG button to return the
unit to RUN mode
(time appears & colon in the display
begins to fl ash)
11. Proceed to page 23.
22
and buttons to set the
programming the