Accessing Non Hot-Plug Areas; Accessing System Board Components - Compaq ProLiant 3000 Setup And Installation Manual

Accessing Non Hot-Plug Areas

To install options, upgrades, or replacements in these areas, you must first shut
down the server power.

Accessing System Board Components

With the access panel and processor removed, you should be able to locate and
identify the System Board components shown in Figure 4-2.
1 2
31
30
29 28 27
Figure 4-2. System board features
Ref.
1 3
-
4 8
-
9
10
11
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
3 4 5 6 7 8
26
25 24 23 22 21 20
Table 4-1
System Board Features
Shared PCI/ISA slots
PCI slots
Auxiliary Fan
Secondary processor power module
Memory DIMM sockets 1-4
File Name: E-CH04.DOC Last Saved On: 1/12/99 1:28 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
9
10
11
12
13
14
19 18 17 16 15
Component
Compaq ProLiant 3000 Servers Setup and Installation Guide
4-5
Continued