Navigation/Radio System; Bluetooth; Bluetooth Controls; Voice Recognition - Cadillac 2010 DTS Owner's Manual

Navigation/Radio System

For vehicles with a navigation radio system, see the
separate Navigation System manual.
®

Bluetooth

Vehicles with a Bluetooth system can use a Bluetooth
capable cell phone with a Hands Free Profile to make
and receive phone calls. The system can be used while
the key is in ON/RUN or ACC/ACCESSORY position.
The range of the Bluetooth system can be up to 9.1 m
(30 ft). Not all phones support all functions, and not
all phones are guaranteed to work with the in-vehicle
Bluetooth system. See www.gm.com/bluetooth for more
information on compatible phones.

Voice Recognition

The Bluetooth system uses voice recognition to
interpret voice commands to dial phone numbers
and name tags.
Noise: Keep interior noise levels to a minimum.
The system may not recognize voice commands if
there is too much background noise.
When to Speak: A short tone sounds after the system
responds indicating when it is waiting for a voice
command. Wait until the tone and then speak.
How to Speak: Speak clearly in a calm and natural
voice.
4-110
Audio System
When using the in vehicle Bluetooth system, sound
comes through the vehicle's front audio system
speakers and overrides the audio system. Use the
audio system volume knob, during a call, to change
the volume level. The adjusted volume level remains
in memory for later calls. To prevent missed calls, a
minimum volume level is used if the volume is turned
down too low.

Bluetooth Controls

Use the buttons located on the steering wheel to
operate the in vehicle Bluetooth system. See Audio
Steering Wheel Controls on page 4 120 for more
information.
g
(Push To Talk) : Press to answer incoming calls,
to confirm system information, and to start speech
recognition.
x
(Phone On Hook): Press to end a call, reject a
call, or to cancel an operation.
I n f o r m a t i o n P r o v i d e d b y :