Setting The Clock - Cadillac 2010 DTS Owner's Manual

Setting the Clock

The vehicle has an analog clock as well as the digital
radio clock. At the time of new vehicle delivery, the
digital radio clock display should be disabled. To use
the digital radio clock and the analog clock, see detailed
instructions in Setting the Clock on page 4 89 for your
specific audio system.
The radio clock and analog clock are not synchronized.
Occasionally you might need to set the digital radio
clock using the procedure below to synchronize both
clocks.
Enabling/Disabling the Digital Radio Clock
(Single CD Player)
1. Turn the radio on.
2. Press the button until the clock and date setting
menus appear.
3. Press the pushbutton located under the forward
arrow tab until the menu for default clock and date
settings appear.
1-16
4. Press the pushbutton located under the currently
displayed status of either ON or OFF. The ON
display indicates the radio clock display is disabled
and the OFF display indicates the radio clock
display is enabled. Press this pushbutton to toggle
the radio clock display on or off.
Setting the Time and Date
(Single CD Player)
1. Turn the radio on.
2. Press and HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year) displays.
3. Press the pushbutton located below any one of the
tabs that you want to change.
4. Increase or decrease the time or date by
a
turning clockwise or counterclockwise.
I n f o r m a t i o n P r o v i d e d b y :