Filter selection
Filter setting
In order to obtaining correct white balance, the sufficient optical filter selection is required accordance
with the scene lighting source. The correct optical filter according to the scene light source needs to be
selected in order to obtain correct white balance.
Operation method
Press FILTER button to change the ND and CC filter.
Caution
1) These buttons are able to be controlled in the CONTROL HEAD mode.
2) The CAP button can not be operated on the back panel even in the CONTROL HEAD mode.
CAP can be operated from remote controller.
ND
Filter
No
C(CAP)
1
2
3
4
Filter
CC
No
A
B
C
D
E
F
ND Filter
CAP
CLEAR
1/4ND
1/16ND
1/64ND
CC Filter
CROSS
3,200K
4,300K
6,300K
8,000K
5,600K( ECC )
14