Table of Contents
Advertisement
Function menu
There are three function menu setting methods in the camera system chain which are,
1) Setup control unit SU-1000 FUNCTION button and MENU button on LCD.
2) Remote control unit RU-1500 FUNCTION button and MENU button on LCD.
3) The CAMERA HEAD switches.
In this section, only describe for the camera head switches function menu. How ever
some of the camera head function & menu display settings are required from a remote
controller. These are noted in each section.
Also, categorized menu items are displayed in the VF or the PIX monitor location where
to see and set suitable camera operation.
Operation and menu screen
LEFT
LEFT
LEFT
LEFT
FUNC BUTTON
The display menu screen is shown on a viewfinder by pressing this button. The menu describes the
camera functions and structure with multiple pages. First page of structure is named Top menu. This
Top menu screen appear (ON) and disappear (OFF) by pressing the FUNC button.
Top
Top M M M M enu
Top
Top
enu: Display in the viewfinder or the PIX monitor.
enu
enu
Top menu has three kinds of status screens depending on the camera operation and the monitoring
location. Details are described as follows.
Top menu has the major camera function items and the selection cursor in the screen. Cursor can be
moved by UP and DOWN buttons. See above.
The cursor is located on the left side of the first line item in Top menu right after open it.
Move the cursor down to the major item and press Right button, then the screen changes to Main
menu.
UP
UP
UP
UP
RIGHT
RIGHT
RIGHT
RIGHT
DOWN
DOWN
DOWN
DOWN
Menu control switch on the rear panel
25
Advertisement
Table of Contents
