Ide Configuration - Asus RS100-E5-PI2 User Manual

PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting
Technology (SMART) feature.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Main
IDE Configuration
ATA/IDE Configuration
Configure SATA as
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection [Host]
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
ATA/IDE Configuration [Enhanced]
Set the ATA/IDE Configuration.
Configuration options: [Disabled] [Compatible] [Enhanced]
Configure SATA as [IDE]
This sub-item appears only when you set the ATA/IDE Configuration item to
[Enhanced] and allows you to set the SATA configuration.
Configuration options: [IDE] [RAID] [AHCI]
ASUS RS100-E5-PI2
BIOS SETUP UTILITY
[Enhanced]
[IDE]
[Disabled]
[35]
Options
Disable
Compatible
Enabled
Select Screen
Select Item
+- Change Option
F1 General Help
F10 S ave and Exit
ESC E xit
5-13