Advertisement
Setting the OneRemote Volume Option
When the t key is pressed, the TV powers up
automatically and is turned on in the TV mode.
If a Bang & Olufsen audio master is in the room, it is
possible to use it and its speakers for handling the TV
sound.
The options in the table below determine how the One
Remote RMB4 handles the volume control.
These options also allow for the powering up of B&O
devices, when t is selected. The audio output
from the TV must be wired to the audio master input
using a Line to DataLink or Line to RCA Phono plugs
cable. Moving the TV sound to the speakers of the
audio master improves the sound quality significantly.
Volume Options
Enter one of these option sequences within 10 seconds:
Lmq00w Volume disabled
Lmq01w The Loewe TV
Lmq02w B *1
Lmq03w c*2
*1 When tis pressed the Beo4 sends a Power On command to the TV. At the same time the Beo4 sends an B
command to a Bang & Olufsen audio master. Until another source is selected, volume commands will be directed to the B&O
audio master.
*2 When tis pressed the Beo4 sends a Power On command to the TV. At the same the Beo4 sends a c command to
a Bang & Olufsen system. Until another source is selected, volume commands will be directed to the B&O system. Via a BeoLink
Active sound may be moved from the TV to B&O PowerLink speakers.
www.oneremote.dk
Sound Destination
Alternative speakers.
Volume Control
Volume emitted from Beo4.
No volume control
Loewe format
Bin B&O format
cin B&O format
2
Advertisement
