Management Functions; Password Protection - VeriFone Vx 810 Duet Operating Instructions Manual

Management Functions

This card contains information about functions that you may
occasionaly use. For more detailed information about the
terminal, refer to the V 810 Reference Guide.
x
Demo Mode
This feature places the terminal into a demonstration
mode that allows you to train and/or test without actual
communications with the host. Before entering DEMO
Mode, the terminal batch must be clear.
that this feature remain password protected.
You can access Demo Mode through the
Menu.
1. From the Main Menu, press OK.
2. Select (F2).
SeTuP
and press OK.
3. Enter
PASSWORD
4. At press (F2).
DemO mODe, On
Reprint
This function prints the last customer copy or any receipt.
1. At the Main Menu >
RePRinT
2. Select " " > F2.
lAST ReCeiPT
" > F3,
3. " then key Invoice Number.
Any ReCeiPT
4. Detach receipt.
Locking the Terminal Keyboard
The terminal keyboard can be locked to prevent
unauthorized use. To unlock the terminal, the Manager level
password must be used. Once locked, the Manager Level
password must be entered to complete any transaction.
LOCKING
1. From the Main Menu > #, 8.
2. " " > (F1).
lOCK KeyBOARD yeS
3. " ".
KeyBOARD lOCKeD
UNLOCKING
1. From the Main Menu > # 8.
2. Enter Manager Level Password.
3. " " > (F2).
lOCK KeyBOARD nO
It is recommended
Configuration
(purple key 3rd from left).

Password Protection

For security reasons, certain transactions (VOID, REFUND
and DEMO) are password protected, requiring entry of the
Manager Level password to initiate. You have the option
of removing the password requirement or creating up to 4
levels of passwords.
Password Level Values
0 – No Password
B
1 – Manager
B
2 – Supervisor
B
3 – Clerk
B
4 – Custom
B
Changing password protection is done through the
Configuration Menu.
1. From the Main Menu, press OK.
2. Press (F4).
menuS/KeyS
3. Enter password > OK.
4. Press (select) (F2).
SlCT
5. Select (F2) to locate the desired transaction type.
neXT
imPORTAnT – Do not change the Master Terminal
Password without securing it in a safe place. If you
accidentally LOCK the terminal and do not have its
password, you will be required to return the terminal for
reprogramming.
Customized Invoice Number
The terminal automatically prints an invoice number on
each receipt. If you prefer, you can activate the feature to
enter your own invoice number, up to 7 digits long, that
references /matches an in-house receipt. You can activate
this feature through the Setup menu in Configuration.
1. Press OK to access the Configuration
(F2).
2. Select
SeTuP
3. Enter and press OK.
PASSWORD
4. Select (F1).
TeRminAl
5. Press (F2) about 60 times until
neXT
appears.
6. Select F3).
eDiT (
7. Select F1).
On (
8. Press (F4) when finished.
eXiT
Menu.
invOiCe numBeR Key?