Chevrolet 1965 CORVAIR Owner's Manual page 6

IGNITION SWITCH
STARTING THE ENGINE
STARTING
SWITCH OFF
AND LOCKED
~
ACC 011
\
OPERATI
ACCESSORIES
ONLY
DRIVING
POSITION
/ '
ON START
STARTING
ENGINE
START -Used only when starting engine. When released,
switch returns to ON.
ON-For normal operation after engine has been started.
OFF-Turns off engine and accessories.
ACC-AII accessories routed through the ignition switch
may be operated with the switch in this position.
Engine will not start with switch in ACC position
-ignition system is by-passed, permitting battery
power to flow directly to accessories .
To prevent rapid discharge of battery, do not
operate accessories for prolonged periods with
switch in ACC position.
3
1. POWERGLIDE-Place control lever in N position.
The engine will not start with the transmission
in gear.
MANUAL TRANSMISSION-Place gearshift control
lever in neutral, and depress clutch pedal to the
floor.
2. Depress accelerator pedal part way and hold. In '
extreme cold weather (O°F. and below), depress
accelerator pedal twice, then hold pedal part
way down during starting.
NOTE: Engine will not start with accelerator ped-
al depressed to floor, except when "flooded."
3. Turn ignition switch to START and release as soon
as engine starts.
4. "FLOODED" ENGINE-Depress accelerator pedal to
floor and hold while cranking engine. DO NOT
"PUMP" ACCELERATOR PEDAL WHEN ENGINE
IS "FLOODED."