so there is no webbing wound around the retractor
drum. Then adjust for proper fit at the buckle.
Folding Rear Seat
The folding rear seatback, standard equipment on
Mon:z:a and Corsa, optional on all other Corvair models
except convertible, quickly and easily folds forward and
down to provide additional cargo space in four-door
models as well as in coupe models. The folding seat in
both models operates in exactly the same manner ex-
cept that the four-door models include a folding panel
at the bottom of the seatback which must be "snapped"
into or out of place after lowering and before raising
the seatback.
CAUTION:
If the car has rear door armrests it
will be necessary to open both rear doors before
raising or lowering the rear seatback.
To lower the folding seatback:
• Pull on each end of the seatback to unlock.
• Swing the seatback forward and down.
• On four-door models, press down on the front edge
of the !pwered seatback with one hand while "snap-
ping" the folding panel, at the bottom of the seat-
back, into place.
To raise the seatback:
• On four-door models, press down on the front edge
of the seatback and "unsnap" the folding panel.
• On all models, lift the seatback and slam firmly into
FOLDING REAR SEAT
20