Chevrolet 1965 CORVAIR Owner's Manual page 39

Jacking the Car
The scissors type jack and its wrench are stowed
in the different models as illustrated. The opposite end
of the wrench is shopedinto a "finger" designed for
use in removing the hub caps.
When jacking the car, set the hand brake, block
diagonal wheel, and, if changing wheels, remove the
hub cap and loosen wheel nuts. Place the jack under the
side of the car located as shown.
CAUTION:
Never attempt to raise the Corvair by
placing any kind of jack under the bumper.
~
_~.,..-
_ _
~-.;:~_
.......
_~Of
REAR WHEEl OPENING
JACKING REAR:
PLAC~
JACK 9 INCHES AHEAD . •
CORVAIR
CORVAIR GREENBRIER
36