Table of Contents
Advertisement
3.
Lift the load lever in the direction of
the arrow to a 135º angle.
4.
Lift the load plate with your thumb
and forefinger to a 100º angle (4A),
then push the PnP cap from the
load plate window to remove (4B).
5.
Position the CPU over the socket,
ensuring that the gold triangle is on
the bottom-left corner of the socket
then fit the socket alignment key
into the CPU notch.
6.
Close the load plate (A), then push
the load lever (B) until it snaps into
the retention tab.
2-6
4B
3
CPU notch
Alignment key
A
Chapter 2: Basic installation
PnP cap
Load plate
4A
Gold
triangle
mark
B
Hide quick links:
Advertisement
Table of Contents
