Table of Contents
Advertisement
Available languages
Available languages
! Do not dismantle the appliance as improper assembly might
result in an electric shock during the subsequent use of the
equipment.
! Repairs should only be done by authorized service centers.
! This equipment is intended for household use only, not for
commercial or industrial use.
! Please follow all the requirements of this guide.
! Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized service
center.
! To avoid mechanical defects and damage, take care during
the appliance transportation.
SPECIAL SAFETY MEASURES
! Before turning the appliance on for the first
! Do not apply too much force when installing
breakage of the appliance and in the termination of the war-
ranty.
! If a smell of burning, foreign sounds or power reduction occur
during the blending process, immediately unplug the appliance
from the outlet and clean the blender. If the blender still mal-
functions after cleaning, contact an authorized service center.
! It is recommended that original factory packaging should be
used for the transportation of the blender in order to prevent
its parts from breaking.
! If the ingredients are hot, allow them to cool before blending
(maximum temperature: 80°C). Never blend hot fat or oil with
the blender.
! Never use the blender to blend paints or solvents.
! Do not attempt to remove any ingredients when the blender is
in operation.
! Always turn the appliance off before removing the attachment.
! The blades of the blender are very sharp. Never touch the
blades of the blender.
! Turn the blender on only after it has been fully assembled.
Always check whether the appliance has been properly as-
sembled before each use.
DESCRIPTION
1. Body
2. Speed selector
3. Button to set normal speed mode
4. Button to set turbo speed mode
5. Buttons to release blender or whisks
6. Blender
7. Whisk
8. Mincer gear
9. Non-slippery bases / covers
10. Mincer blade
11. Mincer bowl 500 ml
time, make sure that all components of the
blender have been properly installed.
the blender attachment, as it may result in the
5
Advertisement
Table of Contents
