Cadillac 2005 DeVille Manual page 78

Voice Recognition
The navigation system's voice recognition allows for
hands-free operation of navigation and audio system
features. Voice recognition can be used when the ignition
is on or when Retained Accessory Power (RAP) is active.
This feature only works if the map DVD is inserted.
If you try to use voice recognition without the map DVD
inserted, the system will display "Please insert the
navigation map DVD to use the voice recognition
feature."
To use navigation voice recognition, do the following:
2. Clearly state one of the commands listed on the
following pages. For example, say "FM1".
3. The system will tell you the command being
implemented. For example, the system will
say "FM1 Radio" and change the audio system to
the FM1 source.
4-2
1. Press the talk symbol
steering wheel control
and release it when
you hear a beep.
The audio system,
if on, will mute.
END: Press this steering wheel control to end voice
recognition or to cancel a command. To cancel a
command, press END immediately after speaking the
command. You will hear a beep confirming the
cancellation.
You may also end voice recognition by not speaking
any commands. After about five seconds of silence,
the system will automatically cancel voice recognition.
At times, the system may not understand a spoken
command. If this happens, try again. If a spoken
command is not available, the system will provide
feedback based on availability.
While using voice recognition, make sure to keep
interior noise levels to a minimum. Otherwise,
the system might not recognize voice commands.
The system will only recognize commands spoken
in English.