Voice Command System; Using The Voice Command System - Subaru CROSSTREK HYBRID 2016 Owner's Manual

For PBAP incompatible but OPP
compatible Bluetooth phones
1. Select the Download 1 Entry key.
2. Transfer the contact data to the sys-
tem using a Bluetooth phone.
. This operation may be unnecessary
depending on the type of cell phone.
. To cancel this function, select the
Cancel key.
3. Check that a confirmation screen is
displayed when the operation is complete.
NOTE
To download all items, you may need to
change the settings in your cell phone
beforehand.
Deleting the contact data
You can delete the phonebook data stored
in the audio set.
1. Display the PHONE screen. Refer to
How to change the hands-free phone
system 5-74.
2. Touch the Contacts key, and then
select the Delete All key.
3. Select the OK key when the con-
firmation screen appears.
NOTE
. Manual transfer operation cannot be
performed while driving.
. If your cell phone is neither PBAP
nor OPP compatible, the contacts can-
not be transferred.
. Depending on the type of Bluetooth
phone:
It may be necessary to perform
additional steps on the phone when
transferring contact data.
Audio/Voice command system

Voice command system

The voice command system enables the
audio, hands-free phone system, etc. to
be operated using voice commands.
Refer to the Command list
samples of voice commands.
Voice commands can be used even when
you set the system to another language.
For details about setting language, refer to
General settings 5-20.
Using the voice command
system
Steering switch
1) Talk switch
CONTINUED
5-81
5-85 for