Enhanced Accident Response System - Alfa Romeo 4C 2015 User Manual

ENHANCED ACCIDENT RESPONSE SYSTEM

In the event of an impact causing air bag deployment, if the communication network remains intact,
and the power remains intact, depending on the nature of the event the Occupant Restraint
Controller (ORC) will determine whether to have the Enhanced Accident Response System perform
the following functions:
• Cut off fuel to the engine.
• Flash hazard lights as long as the battery has power or until the ignition key is turned off.
• Turn on the interior lights, which remain on as long as the battery has power or until the ignition
key is removed.
• Unlock the doors automatically.
After the event occurs, when the system is active, the message "Fuel Cutoff See Handbook" is
displayed.
Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the
engine compartment and fuel tank before resetting the system and starting the engine.
NOTE:
In order to start the engine and move the vehicle to a safe location after an impact, the System
Reset Procedure must be completed.
System Reset Procedure
After an impact causing air bag deployment, the left and right turn signal lights, located in the
instrument panel cluster, will both be blinking until the ignition is turned off.
In order to move your vehicle to the side of the road you must follow the system reset procedure.
Customer Action
1. Turn ignition OFF. (Turn Signal Switch
must be placed in Neutral State).
2. Turn ignition ON.
3. Turn Right Turn Signal Switch ON.
4. Turn Left Turn Signal Switch ON.
5. Turn Right Turn Signal Switch ON.
6. Turn Left Turn Signal Switch ON.
7. Turn Left Turn Signal Switch OFF. (Turn Sig-
nal Switch must be placed in Neutral State).
8. Turn ignition OFF.
9. Turn Hazard Flashers OFF (manually).
If a reset procedure step is not completed within 45 seconds, then the turn signal lights will turn
off and the reset procedure must be performed again in order to be successful.
W H A T T O D O I N E M E R G E N C I E S
Left Turn Light is ON SOLID. Right Turn Light is ON SOLID.
Customer Will See
Left Turn Light is OFF. Right Turn Light BLINKS.
Right Turn Light is ON SOLID. Left Turn Light BLINKS.
Left Turn Light is ON SOLID. Right Turn Light BLINKS.
Right Turn Light is ON SOLID. Left Turn Light BLINKS.
Left Turn Light is OFF. Right Turn Light is OFF.
System is now reset and the engine may be started.
—
—
87