Table of Contents
Advertisement
The spray arm is hitting
an item in the basket.
Items are not secure in
the wash cabinet.
This may be caused by
the installation or the di-
ameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Extended drying is not ac-
tivated.
Dishes were taken out too
soon.
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was used.
The spray arm jets are
clogged.
The triple filter is clogged
or not correctly seated.
The non-return valve is
blocked while open.
Water runs back into the
wash cabinet.
Interrupt the program, re-
arrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Activate the Extended
drying feature.
Leave dishes in longer.
See "Loading the dish-
washer".
Select a more intensive
program see "Program
guide".
Use more detergent, see
"Adding detergent".
Clean the spray arm jets,
see maintenance instruc-
tions.
Clean and reseat the filter,
see maintenance instruc-
tions.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
41
Hide quick links:
Advertisement
Table of Contents
