Chevrolet 2011 Volt Owner's Manual page 36

Hide thumbs Also See for 2011 Volt:
Table of Contents

Advertisement

2-4
Keys, Doors and Windows
B
(Remote Start): Press
B
then press and hold
five seconds to start the vehicle's
heating or air conditioning systems
and rear window defogger from
outside the vehicle using the RKE
transmitter. See Remote Start on
page 2 7 for more information.
The auto heated seats, if equipped,
can be programmed to come on
when the vehicle is remotely
started. See Vehicle Personalization
on page 5 48 for more information.
Also see Auto Heated Seats under
Heated Front Seats on page 3 6.
A
(Charge Port Door): Press to
open the charge port door. See
Plug-In Charging on page 9 44 for
more information.
Programming Transmitters to
the Vehicle
Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter
and
is programmed to this vehicle, all
within
remaining transmitters must also be
reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. Each vehicle can
have up to five transmitters matched
to it.
Programming with a Recognized
Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
For vehicles sold in Canada, two
recognized transmitters are required
to program a new transmitter. To
program, the vehicle must be off
and all of the transmitters, both
currently recognized and new, must
be in the vehicle.
1. Place the recognized
transmitter(s) in the cupholder.
2. Insert the vehicle key of the new
transmitter into the key lock
cylinder on the outside of the
driver door and turn the key to
the unlock position five times
within 10 seconds.
The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4 OR 5.
3. Remove the rubber mat in
the instrument panel storage.
Extend the key blade on the new
transmitter and insert the key
blade into the transmitter slot.
4. Press and hold the POWER
button on the center stack
for two seconds. When the

Advertisement

Table of Contents
loading

Table of Contents