Table of Contents
Advertisement
2.6.2
Removable Drives
Removable Drives
1. Floppy Disks
F1:Help
ESC: Exit
1. Floppy Disks
Allows you to assign a removable drive attached to the system.
2.6.5
Boot Settings Configuration
Boot Settings Configuration
Case Open Warning
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x
Typematic Rate (Chars/Sec)
x
Typematic Delay (Msec)
Full Screen LOGO
Halt On
F1:Help
ESC: Exit
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled,
clears the chassis open status. Refer to section ".0.2 Internal connectors"
for setting details. Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature.
When Enabled, the system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
2-40
Phoenix-Award BIOS CMOS Setup Utility
Boot
↑↓ : Select Item
→← : Select Menu
Phoenix-Award BIOS CMOS Setup Utility
Boot
↑↓ : Select Item
→← : Select Menu
-/+: Change Value
Enter: Select Sub-menu
[Enabled]
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Enabled]
[All, But Keyboard]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Use < ↑ > or < ↓ > to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
