Table of Contents
Advertisement
2.5.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
Hardware Monitor
Q-Fan Controller
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU FAN Speed
PWR FAN Speed
CHA FAN1 Speed
CPU Fan Speed warning
F1:Help
ESC: Exit
Q-Fan Controller [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, +2V Voltage, 3.3V Voltage, 5VCC
Voltage
The onboard hardware monitor automatically detects the voltage
output through the onboard voltage regulators. These items are not
user-configurable.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed, PWR Fan Speed, CHA Fan Speed
The onboard hardware monitor automatically detects and displays the CPU,
Power, and Chassis fan speeds in rotations per minute (RPM). If the fan is
not connected to the motherboard, the field shows 0. These items are not
user-configurable.
CPU Fan Speed warning [800 RPM]
Allows you to set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]
2-3
Phoenix-Award BIOS CMOS Setup Utility
Power
↑↓ : Select Item
→← : Select Menu
[Disabled]
[
1.50V]
[
3.31V]
[
4.94V]
[ 11.26V]
48ºC
38ºC
4962 RPM
0 RPM
0 RPM
[800 RPM]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
