Frequently Asked Questions; Technical Faults - Miele G 4275 Operating Instructions Manual

With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Problem
The program does
not start.
The dishwasher
stops during a
program.
The buzzer sounds.
All program
indicators are
flashing fast when
the door is open.
The drain pump is
running when the
door is opened.
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The dishwasher is not
turned on.
The fuse has tripped.
There may be a technical
fault.
The waterproof system
has activated.

Frequently asked questions

Solution
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
See data plate for minimum
amperage.
Turn the dishwasher on "g" and
select a program.
Reset the circuit breaker.
See data plate for minimum
amperage.
Turn the dishwasher off "o".
After a few seconds:
– Turn the dishwasher on.
– Select the desired program
with the program button.
– Close the door.
If the problem persists contact
Technical Service.
– Turn off the water supply.
– Contact Miele Technical
Service.
31