4.26.10 Setting the security code
This is used to change the remote access PIN if
necessary.
1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
SECURITY CODE
select
.
3. Press MENU and then enter the 4-digit security
code.
4. Press MENU to save.
50
.
5. Help
I cannot pair my mobile phone to the telephone
base
• Make sure the Bluetooth function of your Bluetooth
enabled mobile phone is turned on. See your mobile
phone User's Manual for more information.
• Make sure the cordless handset, corded base and
cell phone are located near each other.
• Remove the Motorola L512CBT/L513CBT/
L514CBT/L515CBT from your mobile phone's
Bluetooth device history list (see your mobile phone
User's Manual for more information).
• Carefully follow the pairing instructions in the User's
Guide, making sure that your mobile phone is not
connected to any other Bluetooth device(s).
• Turn off your mobile phone, and then turn it on
again.
• Reset the telephone base. Unplug the unit's
electrical power. Wait for approximately 15 seconds,
and then plug it back in. Repeat the above
suggestions.
Help