8.
SCSI controller setting (3-pin SCSI_EN1)
This jumper allows you to enable or disable the onboard Adaptec
AIC-7901X PCI-X U320 SCSI controller. Set to pins 1-2 to activate the
SCSI feature, and support RAID configurations.
P5MT-S SCSI Controller Setting
9.
Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS when it
gets corrupted.
To update the BIOS:
1.
Prepare a floppy disk that contains the latest BIOS for the
motherboard (xxxx-xxx.ROM) and the AFUDOS.EXE utility.
2.
Set the jumper to pins 2-3.
3.
Insert the floppy disk then turn on the system to update the
BIOS.
4.
Shut down the system.
5.
Set the jumper back to pins 1-2.
6.
Turn on the system.
P5MT-S BIOS Recovery Setting
2-22
SCSI_EN1
1
2
2
3
Enable
Disable
(Default)
RECOVERY1
1
2
2
3
Normal
BIOS recovery
(Default)
Chapter 2: Hardware information