Table of Contents
Advertisement
6.
Select the stripe size from the
menu, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.
7.
When prompted, use the keyboard to assign a name for the RAID 10
set, then press <Enter>.
8.
If you want to make the array
bootable, select Yes from the
menu, then press <Enter>.
9.
When prompted to create the
RAID 10 set, select <Yes>, then
press <Enter>.
The utility erases all data from the selected hard disk drives. Make sure
to backup all important data before creating a RAID set.
A Build Complete message
appears to indicate that you have
successfully created the RAID 10
set.
5-42
Chapter 5: RAID configuration
Advertisement
Table of Contents
