Miele G 1202 Operating Instructions Manual page 39

Problem
Dishes are not dry,
glasses and cutlery
are spotted.
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
Possible fault
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
A "Tab" product was used.
These products have a low
drying effect.
The "Tab" option is turned
on, but a normal product
was used.
Not enough rinse aid was
used.
Unsuitable "Tab" products
were used.
The salt container is empty
(depending on model).
The salt container lid was
not correctly screwed on
(depending on model).
Frequently asked questions
Solution
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Leave dishes in longer, see
"Use".
Set the Detergent setting for
a normal detergent and add
rinse aid.
Set the Detergent setting to
the detergent used, see
"Additional options - Tab".
Increase the dosage, see
"Before using for the first
time".
Change detergent, use
normal tabs or normal
powder detergent.
Refill the salt container, see
"Before using for the first
time".
Reseat the lid making sure ir
screws back on correctly.
39