Miele EXCELLA G 2630 SCI Operating Instructions Manual page 52

Frequently asked questions
Issue
Detergent is left in the
dispenser at the end of a
program.
The detergent lid cannot
be closed properly.
The door and the interior
walls are still wet after a
program has finished.
Water remains in the
wash cabinet at the end
of a program.
52
Possible fault
The dispenser was
damp when
detergent was
added.
Detergent residue is
blocking the catch.
This is not a fault. It is
the normal operating
mode of the drying
system.
The triple filter in the
wash cabinet is
clogged.
The drain pump or
the non-return valve
may be blocked.
The drain hose is
kinked.
Solution
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
– Turn the dishwasher off s.
Clean the triple filter. See
"User Maintenance
Instructions".
Clean the drain pump and
non-return valve, see
maintenance instructions.
Remove any kinks from the
drain hose.