Table of Contents
Advertisement
a 1 exhaust socket for exhaust
ducting 150 mm.
b 1 reducing collar for exhaust
ducting 125 mm (recommended
for connection to existing 125 mm
ducting only).
c 1 non-return flap for fitting into the
exhaust socket on the motor unit
(not needed for recirculation mode).
d Covers for installation in the
extraction area (DA 2660: 2 covers;
DA 2620: 1 cover).
e Conversion kit for recirculation
mode (the conversion kit is not
supplied, but is available as an
optional accessory - see "Technical
data"). The kit contains an exhaust
grille and flexible aluminium hose
with hose clips.
4 x M5 x 40 mm screws, 4 washers, 4
x M5 nuts for securing the rangehood
to an interim shelf.
Installation
35
Hide quick links:
Advertisement
Table of Contents
