Monarch 939i Operating Instructions Manual page 26

You may see
11. Type the number of times the data prints across the tag width.
Press N.
¨
If your printer has a knife and you want to cut tags, press R
to display "Yes" and press N.
¨
If your printer does not have a knife, the Cut Option prompt
does not appear. See "Printing Tags Without Cutting" for more
information.
If you answered "Yes" to the cut option, you have several cut
modes to select from.
Cut after tag
(Cut Mode 1)
Cut after batch
(Cut Mode 2)
Cut last ticket
(Cut Mode 3)
No cut before
(Cut Mode 4)
Cut in Strips
(Cut Mode 5)
3-4 Entering Batch Data
Number of parts?
[1/5]: _
Cut Option
No
Cuts before first tag, cuts each tag, and cuts after
last tag. Printed tags left between knife and
Cuts before first tag, cuts after batch. Cuts in strips,
not each tag. Printed tags left between knife and
Cuts before first tag, cuts each tag, cuts after the last
tag and feeds one or two tags past the printhead
when it cuts the last tag in the last batch.
Does not cut before the first tag in a batch, but cuts
between each tag and after the last tag in the batch.
Printed tags left between knife and printhead.
Cuts before first tag, cuts after batch. Cuts in strips,
not each tag. Feeds one or two tags past the
printhead when it cuts the last tag in the batch.
r
printhead.
printhead.