Monarch 939i Operating Instructions Manual page 18

12. Decide if you want to change the default (No) and press either
l or r to display your selection. If you select "Yes," the last
tag in the batch is cut. The printer must feed one or two tags
past the printhead to cut the last tag in the batch. Press N.
13. Decide if you want to see this prompt in Batch Entry mode and
press either l or r to display your selection. If you select
"Yes," the last tag in the batch is cut. The printer must feed
one or two tags past the printhead to cut the last tag in the
batch. Press N.
14. Decide if you want to change the default (No) and press either
l or r to display your selection. If you select "Yes," the
knife cuts before the first tag and cuts after batch, so the tags
are cuts in strips. Press N.
15. Decide if you want to see this prompt in Batch Entry mode and
press either l or r to display your selection. Press N.
16. Decide if you want to change the defaults (No) and press
either l or r to display your selection. If you select "Yes,"
the knife does not cut before the first tag in a batch, but does
cut between each tag and after the last tag in a batch.
Press N.
2-4 Setting Batch Options
Cut After Batch?
Prompt? Yes
Cut After Batch?
No
No Cut Before?
Prompt? Yes
No Cut Before?
No
r
r