Wolf cinema SDC-12 User Manual page 72

Table of Contents

Advertisement

The Image Cannot be Seen from an HDMI Source
Is the setup of "Control with HDMI"
function "Off"?
• Even if the "Control with HDMI" function is "On", there are still some devices that cannot reveal images normally via HDMI.
Color Does Not Appear or Looks Strange
Is the image correctly adjusted?
Video Image is Fuzzy
Is the focus correctly adjusted?
Is the unit placed too near or too far
away from the screen?
Video Images are Missing or Cropped
Has setting been performed for
screen mask?
Is the display out of position?
Projected Image is Dark
Is the lamp near exhaustion?
The Unit Works when Power is Turned on but Stops Abruptly After a Few Minutes
Are the air inlets and exhaust vent
blocked?
Is the filter dirty?
Power is Cut Off Suddenly
Has "Off Timer" been configured?
Has "ECO Mode" been configured?
Unable to View 3D Images
Are the 3D Glasses turned on?
Are the 3D Glasses charged?
Are the 3D Glasses and 3D Emitter to
far away from each other?
Is the correct 3Dformat selected?
Set up the "Control with HDMI" function to "Off".
Adjust "Color" and "Tint" in the setting menu.
Adjust the focus.
Set the unit at a correct distance from the screen.
Set "Mask" in the setting menu to "Off".
Alter the "Picture Position" value in the setting menu to ensure
that images are not missing.
Check the lamp time on the information menu. Prepare a new
lamp unit or replace as soon as possible when the lamp is near
its end time.
Remove the power plug when the unit is in standby mode and
remove any blocking object. After that, insert the plug again.
Clean the filter.
Set "Off Timer" in the setting menu to "Off".
Set "ECO Mode" in the setting menu to "Off".
Turn on the power manually
Check the battery (charge) of the 3D Glasses.
Position them at an appropriate distance.
If the format does not switch automatically, configure 3D Format
in the setting menu.
SDC-12/SDC-15
Reference page: 55
Reference page: 51 to 54
Reference page: 36
Reference page: 23, 25
Reference page: 41, 55
Reference page: 54
Reference page: 65 to 68
Reference page: 3, 15
Reference page: 69
Reference page: 59
Reference page: 59
Reference page: 62 to 64
Reference page: 62 to 64
Reference page: 62 to 64
Reference page:
56 plus Addendum
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdc-15

Table of Contents