Table of Contents
Advertisement
Mask
This hides the upper, lower, left and right borders of the screen with a black mask. Can be individually adjusted
vertically and horizontally. Adjust to your preference.
Setting: Off, 2.5%, 5%, Custom
Off
Not masked.
2.5%
Compared with the original video image, approximately 2.5% around the image may be masked.
5%
Compared with the original video image, approximately 5% around the image may be masked.
Custom
Left
Compared with the original video image, approximately 5% of the image is masked on the left side.
Settings: 0 ~ 5%
Right
Compared with the original video image, approximately 5% of the image is masked on the right side.
Settings: 0 ~ 5%
Top
Compared with the original video image, approximately 5% of the image is masked at the upper side.
Settings: 0 ~ 5%
Bottom
Compared with the original video image, approximately 5% of the image is masked at the bottom side.
Settings: 0 ~ 5%
Progressive
Interlaced signals (480i/576i/1080i) are converted to progressive signals. Interpolates interlaced signal video images
with video images from the surrounding fields. Please set to your preference.
Settings: Auto, Off
Auto
This detects 24p video content, as seen in film. This also detects interlaced signals from the original video material
or if they are the product of signal conversion and are interpolated accordingly.
Off
The interpolation of video images as interlaced video signals, e.g. video material.
2-1 HDMI
Input
Sets the dynamic range of the input video images (scale). Dark and bright areas, which are not matched correctly,
might get brighter or darker. If you are unsure of the input signal dynamic range, please review "Level Check".
Settings: Standard, Enhance, Super White
Standard
This is most commonly used when the input signal is standard video, and the resulting dynamic range levels fall
between 16-235.
Enhanced
This is where the dynamic range of the input video will scale from 0-255, as typically seen with PC signals.
Super White
This is set when the dynamic range of the input video scales from 16-255. Please set the output to video equipment compatible with
SuperWhite for SuperWhite-enabled DVD/BD etc.
Level Check
You can confirm the dynamic range of the input signal. A pattern as shown in the illustration is displayed in the four corners
and center of the screen. Please compare the dynamic range of the input signal with this pattern illustration and confirm.
(*) The number in the illustration is the scale level. This number is not displayed. The illustration of the gradation in the figure
is accentuated for explanatory purposes. It may be different from the actual scale level.
Color Space
Adjust the color space of the input signal.
Settings: Auto, YCbCr(4:4:4), YCbCr(4:2:2), RGB
Auto
YCbCr(4:4:4), YCbCr(4:2:2), RGB signals are automatically detected and configured.
YCbCr (4:4:4)
Settings if the input of a YCbCr(4:4:4) input video image signal is detected.
YCbCr (4:2:2)
Settings if the input of a YCbCr(4:2:2) input video image signal is detected.
RGB
Default setting when RGB video signals input are detected.
Control with HDMI
Configured communication of HDMI equipment.
Settings: On, Off
SDC-12/SDC-15
[Standard]
[Off]
[0]
[0]
[0]
[0]
[Auto]
[Auto]
[Off]
55
Advertisement
Table of Contents
