Wolf cinema SDC-12 User Manual page 67

SDC-12/SDC-15
5 Remove the Power Plug from the Outlet
6 Tighten the Screws of the New Lamp Unit
• Tighten the screws with a
7 Attach the Lamp Cover
• Insert the top part (with 2 claws) of the lamp cover into the unit.
• Fasten the screws with a
66
1080p D-IL A 3D Front Projector
Handle
screwdriver.
screwdriver.
2013 User' s Manual
Use only genuine
replacement parts for
the lamp unit. Also, never
attempt to reuse an old lamp. This
may cause a malfunction.
• Do not touch the surface of a new
lamp. This may shorten the lamp
life and cause lamp blowout.
After Replacing the Lamp
• Do not place the removed lamp
unit at any location reachable
by children, or set it near
combustible items.
• Dispose of used lamp modules
in the same way as fluorescent
lamps. Follow your local community
rules for disposal.