Vertex Standard VXA-220 Operating Manual page 45

WXAF
Function: Selects the Alert functions when receiving the
Weather Alert Signal on the WX channel.
Available Values: BP/LED/B+L/oFF
Default Setting: oFF
BP: Sounds a loud beep when receiving the Weather
Alert Signal.
LED: Flashes the back light of the Display/Keypad when
receiving the Weather Alert Signal.
B+L: Sounds a loud beep and flashes the back light of
the Display/Keypad when receiving the Weather
Alert Signal.
oFF: Disables the Alert function.
To stop the loud beep and/or back light flashing, press
any key (except [ ] / [ ] key)
When the Weather Alert function is activated, the "
icon will appear on the display.
VOX
Function: Enables/disables VOX operation.
Available Values: on/oFF
Default Setting: oFF
VDLY
Function: Selects the VOX delay ("hang") time.
Available Values: 05/10/15/20 (x0.1 sec)
Default Setting: 10 (x0.1 sec)
VXA-220 P VI O
RO
M
ENU
M
PERATING ANUAL
"S " M
ET ODE
VSNS
Function: Sets the VOX sensitivity.
Available Values: 1 ~ 8
Default Setting: 4
LOCK
Function: Selects the control locking lockout combina-
tion.
Available Values: K/KD/P/PD/PK/PKD/D
Default Setting: K
K: Keypad, D: DIAL knob, P: PTT switch
(Other selections are combinations of these lock-out
choices)
STEP
Function: Selects the synthesizer steps.
Available Values: 25 kHz/8 kHz
"
Default Values: 25 kHz
BPLV
Function: Sets the Beep level.
Available Values: 1~ 3
Default Setting: 2
STLV
Function: Sets the Side tone level.
Available Values: 1 ~ 3
Default Setting: 3
43