Vertex Standard VXA-220 Operating Manual page 15

To set 118.275 MHz, you do not need to press the
final "5" in the frequency:
[ 1 ] [ 1 ] [ 8 ] [ 2 ]
You may also turn the
top panel's DIAL selec-
1
tor knob to choose the
desired operating fre-
quency. The channel
frequency will appear
on the LCD.
Press the [ ] / [
2
key to set the volume
level. If no signal is
present, press and hold
the [ MONITOR ] button
for 2 seconds; back-
ground noise will now
be heard, and you may
use this noise to set the
desired audio level.
Press the [ MONITOR ]
button momentarily to
silence the noise and re-
sume normal (quiet)
monitoring.
VXA-220 P VI O
RO
B
ASIC
[ 7 ] .
]
F
M
PERATING ANUAL
O
PERATION
1: If you change a function of DIAL and [ ] / [ ]
key by pressing the [ F ] key followed by the
[ 5 ( DIAL/
ing frequency by pressing the [ ] / [ ] key.
2: If you change a function of DIAL and [ ] / [ ]
key by pressing the [ F ] key followed by the
[ 5 ( DIAL/
by turning the DIAL selector knob.
To turn the radio off,
press and hold in the
[ POWER ] switch for 3
seconds.
)] key, you may choose the operat-
)] key, you may set the volume level
13