Installing The Belt Clip; Charging The Optional Battery Pack - Midland X-Tra Talk LXT360 Series Owner's Manual

BATTERY
COMPARTMENT
BATTERY
COMPARTMENT
COVER
Press here and
push down to open

INSTALLING THE BELT CLIP

To install the BELT CLIP, slide the clip up into the slot on the back of
the radio until the BELT CLIP LATCH clicks. To remove the BELT
CLIP, press the LOCK TAB up, then gently pull the belt clip down
toward the bottom of the radio.

CHARGING THE OPTIONAL BATTERY PACK

Your LXT360/365 Series is equipped for using an optional recharge-
able NiMH battery pack which can be recharged with the optional
desktop charger (as described below). The LXT360/365 can also be
charged by inserting the AC adapter into the radio charge jack. Initial
charge time is 24 hours. Charge time is about 12 hours thereafter. For
maximum battery life, we recommend charging the battery pack when
the low battery icon comes on. Remove the radios from the charger
when the charge time expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with RED color will light up, indicating charging function.
BELT CLIP
LOCK TAB
BELT CLIP
LATCH