Dhcp Server; Dynamic Pool Settings - D-Link DAP-1353 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of the
IP address that can be assigned to stations in the
network. A Dynamic Pool allows wireless stations
to receive an available IP with lease time control. If
needed or required in the network, the DAP-1353 is
capable of acting as a DHCP server.
Function Enable/
Dynamic Host Configuration Protocol (DHCP)
assigns dynamic IP addresses to devices on
Disable:
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-1353 to function
as a DHCP server.
Input the first IP address available for assignment
IP Assigned
From: on your network.
The Range of
Enter the number of IP addresses available for
Pool (1-254):
assignment. IP addresses are increments of the IP address specified in the "IP Assigned From" field.
Subnet Mask: All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here.
Gateway:
Enter the IP address of the gateway on the network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
D-Link DAP-1353 User Manual

DHCP Server

Dynamic Pool Settings

44