Configuration - D-Link DAP-1353 User Manual

Section 3 - Configuration

Configuration

To configure the DAP-1353, use a computer that is connected to the DAP-1353 with an Ethernet cable (see the Network
Layout diagram ).
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet
Options > Connections > LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Mozilla Firefox).
Type the IP address and http port of the DAP-1353 in the address field (http://192.168.0.50)
and press Enter. Make sure that the IP addresses of the DAP-1353 and your computer
are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-1353, make sure to enter the
correct IP address.
Enter the user name (admin) and your
password. Leave the password field
blank by default, and click Login.
Note: If you have changed the password, make sure to enter the correct password.
D-Link DAP-1353 User Manual 14