How Esp2 Works - Midland 77-120ESP Owner's Manual

Owner's Manual 77-120 ESP
How ESP2™ works to make your CB sound better.
The ESP2™ noise reduction system constantly monitors the signal strength and
the type of noise present. When the signal strength is too low for good reception,
the receiver sound is automatically adjusted to dramatically reduce the noise that
comes through the speaker. While the noise is decreased the actual sounds you
need to hear are increased.
Skip interference can cause whistles and howling sounds. Electrical interference from power
lines, ignition systems or other sources can produce low humming and buzzing noise. These
high and low sounds are not needed for communications. ESP2™ can determine the difference
between undesired noises and sounds you want to hear and filter the noises out.
These results ESP2™ can accomplish without decreasing receiver range (it
usually increases range). Most importantly, ESP2™ works by itself and does not
need to be listening to other ESP2™ equipped CB's to be 100% effective.
The end result of ESP™ is that you can lower or completely stop using your
squelch control. You will hear weak signals that cause other CB's to hear only
noise. With this new patented sound control system you will find yourself using
your CB more thereby increasing your safety and enjoyment.
www.midlandradio.com Page 11 of 13