Wireless Security - D-Link DSL-G604T User Manual

Wireless Security

The wireless LAN interface of the DSL-G604T has various security features used to limit access to the device or
to encrypt data and shared information. The available standardized security for wireless LAN includes WEP,
802.1x, WPA and WPA-PSK Wireless security is configured with the Wireless Settings menu located in the
Home directory.
The wireless access point is not enabled by default. It may be enabled using the Setup Wizard as previously
described, or use the Wireless Settings menu. To enable the wireless access point, click the Enable AP option so
that a check mark appears in the box. Click the Apply button to begin wireless operation. To disable the access
point, deselect the Enable AP option and click the Apply button.
Before enabling any security function for wireless operation, it is recommended to be
sure the access point is working effectively. If possible, test the wireless interface to be
sure stations are able to associate with the DSL-G604T before changing security
Note
settings.
Configure Security Protocols
In the Wireless Settings menu, select the type of security you want to configure. The menu will change to present
the settings specific to the method being configured.
DSL-G604T Wireless ADSL Router User's Guide
Configure WEP Wireless Security
39